Brewing With Total Confidence
Separate names with a comma.
It was. Got 5kg of Rye fine crush the other year then forgot about it. Probably 15 months or so. Chucked a bit in a few pales then did a 90% ish...
Probably doesn't help with your question but just made a Rye saison with around 4kg of Rye malt thats over a year old. (Bit of a bastard brew)...
Simple and good results. I might use that as don't really want to just dangle the probe. If lifting the lid for glasses or bottled beer. I'd...
Really good idea. Nice job I've been reading a little on heat differential and will be adding it to the 'future mod/upgrade' list. Lots of people...
Quick lid fit test. Need to take a wee bit from inside collar and then foil tape. And seal it to freezer. Will add some insulation at some...
Drilled tap holes, fit test and built the collar. Had some osmo left from a few years back so chucked a coat of that on. Instead of buying any...
Timber turned up. Need to pick a stain colour, decide if using adhesive or mounting tape on the collar. Cut a recess in the rear of the collar...
Sure will. Soon as the freezers here and collar wood is ordered I'll get some pics. Unsure on stain yet but quite like a dark stained oak against...
I've started buying the bits in now. Taps. JG fittings and 3/16 line. I'll give all that a go then get some eva if there's any issues. Those...
Also just been checking out the 3/16 beer line on malt Miller. Seems the ID is 0.117″ so I would need a foot?! That can't be right can it?
That's some good advice. Was debating where to put the faucets. Those look nice. I've just this minute purchased 2 x intertaps with flow control....
Great responses. Thank you. Appreciate it. Aye, eyeing up those intertap g2 flow. Everywhere seems sold out except an ebay listing for 57 with...
Hi. I've been using some mini kegs with a sodastream bottle and have been really enjoying the little system. I've liked it that much I've decided...
Thanks for all the quick responses. Some great advice, appreciated it. I'll get reading on conversion and sort a better recipe out by checking...
I've recently got back into brewing and enjoying the mini mash method as it fits into a hectic week schedule quite well. Banged out a Malt...
Not sure on the Pint365 cylinder. Might be half pint. Still trying to see how hoppy pales fare through a beer engine. Stouts and what not will...
The Pint365? Home beer engine. Connects to polypins or bag in box. Of if you've got gas, a corny keg under low pressure. Plan is to get some...
Not sure if I'm doing the full batch with coffee yet, as I've been toying with bottling half and adding coffee to the remainder. Or else I'd be...
I sure will Was thinking of using a star San mix.
Thanks for the quick reply I'll give this method a go. Easy enough eh. Cheers.
