First lager / DIY lager fridge

beerilikebeer

New Member
Trial Member
Joined
May 29, 2018
Messages
5
Reaction score
11
Points
3
Going to try my first lager (creemore clone-ish) so I built an insulated box to control temps better. For keeping it at the proper temps I used the stainless steel immersion chiller that came with my robobrew to run chilled water from my keezer tap chiller pump. I need a new temp sensor but so far it's keeping temps properly.








Fermentation box built and it's holding temp great, granted there was no load on it from the yeast but it should keep up just fine.

The ice packs were to help it get down to temp initially and were still mostly frozen 24 hours later. I may have to add them through out the fermentation but not a big deal, time will tell.

 
Cool. Looks good.
 
I see that spiggo6 sits pretty high up in the ferm bucket there going to loose a bit of beer on transfer there @beerilikebeer .
 

Back
Top