Comments on: Add Thermometer Probe to HLT MLT Cooler

By: mash cooler: thermometer - Home Brew Forums

mash cooler: thermometer - Home Brew Forums — Tue, 13 Sep 2011 16:40:07 +0000

[...] THIS out. Cheap, easy, works. What more could you ask for? __________________ It was a woman who [...]

By: Looking for a Good Thermometer - Home Brew Forums

Looking for a Good Thermometer - Home Brew Forums — Tue, 08 Feb 2011 06:44:27 +0000

[...] Steve Sorry, I know this is kind of , but I was on here the other day and ran across this link http://www.brewersfriend.com/2009/02/15/add-thermometer-probe-to-hlt-mlt-cooler/. I thought it was an awesome idea to check mash temps if you use a cooler for an MLT. I think I'll [...]

By: Digital temp gauge to MLT - Home Brew Forums

Digital temp gauge to MLT - Home Brew Forums — Tue, 01 Feb 2011 15:59:49 +0000

[...] Here ya go: http://www.brewersfriend.com/2009/02/15/add-thermometer-probe-to-hlt-mlt-cooler/ [...]

By: Thermometer through lid: Adding temp control to round cooler - Home Brew Forums

Thermometer through lid: Adding temp control to round cooler - Home Brew Forums — Fri, 07 Jan 2011 14:43:39 +0000

[...] Originally Posted by RobbyBeers The foam is a great idea. I'm having a hard time picturing the probe set up though. Does the cord just go under the screwed-on lid? That's not a bad idea either. Hadn't thought of it. These are good options that I might try out, but I'm also looking for something pretty clean and permanent. I was thinking maybe I could drill a carboy-sized hole in the lid, put a stopper in it, then put a probe through that. Here is how to use a stopper: http://www.brewersfriend.com/2009/02/15/add-thermometer-probe-to-hlt-mlt-cooler/ [...]

By: Mash Tun Thermometer? - Home Brew Forums

Mash Tun Thermometer? - Home Brew Forums — Thu, 18 Nov 2010 15:37:33 +0000

[...] ways to go through the wall. I have been looking at thermowells, or even the rubber stopper method. http://www.brewersfriend.com/2009/02/15/add-thermometer-probe-to-hlt-mlt-cooler/ But for now I use a floating thermometer and just close the lid. And check it at the end. I barely [...]

By: Cheap & Easy 10 Gallon Rubbermaid MLT Conversion - Page 127 - Home Brew Forums

Wed, 20 Oct 2010 15:21:52 +0000

[...] Originally Posted by IPAAAA What has everyone used as a thermometer for their this? I want to add one to it but just don't know which is good and will work best. I am tired of using my little floating one. Here's an idea: http://www.brewersfriend.com/2009/02/15/add-thermometer-probe-to-hlt-mlt-cooler/ [...]

By: Rubbermaid Cooler Thermometer - Home Brew Forums

Rubbermaid Cooler Thermometer - Home Brew Forums — Sat, 03 Apr 2010 00:16:29 +0000

[...] Bilchman Brewmometer? Weldless Brewmometer 1/2 Inch NPT Brewmometer Bulkhead I have read THIS thread, but want something a little more professional Just read Remote probe thermometer wort [...]

By: Thermometer for coolers?? - Home Brew Forums

Thermometer for coolers?? - Home Brew Forums — Sat, 06 Mar 2010 13:56:18 +0000

[...] http://www.brewersfriend.com/2009/02/15/add-thermometer-probe-to-hlt-mlt-cooler/ [...]

By: Digital Thermometer for Brewing | Brewer's Friend

Digital Thermometer for Brewing | Brewer's Friend — Sat, 06 Feb 2010 16:13:01 +0000

[...] Brewers who build out their rig will want to go with a thermometer embedded inside their hot liquor tank or mash lauter tun. This has been covered by a separate Brewer’s Friend article. [...]

By: Cooler MLT Temp Probe

Cooler MLT Temp Probe — Wed, 03 Feb 2010 20:51:45 +0000

[...] Originally Posted by Dog House Brew I want to insert a temp probe into my 100qt Extreme cooler through the outside wall. My question is how much of the probe needs to be in the mash to give acurate readings. I have a Blichmann Brew Mometer with a 5" stem and wondered if it would give me acurate mash temp readings. By the time I run it through the wall and fittings I'm probably looking at 2" of the probe being in the mash. Would I be better to buy the 12" stem thermometers and using a compression fitting? Can you get a compression fitting small enough to go on the small stem probes? I want to put it through the outside to keep from opening the cooler to take temp readings. Here ya go: http://www.brewersfriend.com/2009/02/15/add-thermometer-probe-to-hlt-mlt-cooler/ [...]